Lowell Manufacturing LPOR4-719 7U Pull-Out Rack with 4 Slides, 19" Depth, Black
1004.96 USD*
Description
The rack for built-in use measures 19.06"W x 19.22"D x 14.12"H and provide 7 rack units of panel space (7U front and rear rails). The rack shall be made with certified U.S. steel and feature a 14-gauge steel base and 11-gauge steel mounting rails tapped 10-32. The base shall feature four heavy duty rails which shall allow the rack to slide forward while supporting a load up to 250 lbs. The rack shall include three cable lacing bars in the rear and a front security panel which shall mount with screws to deter slide-out access to equipment as needed for security. The rack shall have a black powder epoxy finish. Pull out rack (slide out rack) for use in cabinets or custom millwork, the top section of the rack slides forward to access mounted electronics. <b> Installation </b>The base can be mounted flush or recessed up to 2" in boxed wall or cabinetry. Front security panel screws into position to deter unauthorized access to mounted equipment. <b> Mounting Rails (corner post) </b>11-gauge steel corner post rails tapped 10-32 with bi-directional numbered RU increments allow rail installation in either direction. Front rails are 10U; rear rails are 7U. <b> Cable Management </b>Three (3) integral cable lacing bars in rear. Two (2) obrounds in each side panel. <b> Hardware </b>Pilot point screws with captive washers for quick assembly.