Make Noise touch controller & sequencer

357.06 GBP*

Description

The 0-CTRL is a combination of sequencer and touch controller and is aimed equally at friends of experimental and loop-based mu... CV/Gate Controller & Sequencer The 0-CTRL from Make Noise is a combination of sequencer and touch controller and is aimed equally at friends of experimental and loop-based music. The completely analog device does without menus, sub-functions or even a display and implements inputs immediately. The eight "golden" buttons are capacitive controllers; touching them not only defines the current step in the sequence, but also generates a pressure value (aftertouch). The three knobs assigned to each button define the pitch, decay time of the decay envelope and duration of the sequence run for each button/step. This allows for extremely dynamic playing, whether by hand or sequentially. In addition, the direction of playback can be varied via control voltage, so for example backwards, oscillating and random are also possible. If you include the gate single outputs or a Eurorack sequencer, 0-CTRL can be dynamically reset to realize playback patterns with less than eight steps. Thanks to clock and reset inputs, the unit can be synchronized to a Eurorack modular system or a MIDI to clock interface. The Make Noise 0-CTRL : Analog Sequencer Touch Controller Variable decay envelope per step Variable duration per step CV output Pressure output Dynamic gate & decay output Gate-out per step (8x) Direction via CV Internal clock generator Via clock/reset synchronizable to other devices (e.g. MIDI interface) Voltages fully compatible to Make Noise 0-Coast and any Eurorack module Delivery includes power supply and patch cable Make Noise 0-CTRL