MSW Planer - with jointer - 2-in-1 - 1500 W - 2 blades - 252 mm width MSW-WOBD-1500L

387.00 GBP*

Description

Table legs, worktops, frames or rafters: With the planer and planer from MSW, things can run smoothly in your workshop. You can plane all types of wood on the 2-in-1 machine - first on the planer and then with the thickness planer to the desired thickness. Particularly in the construction industry and in woodworking, planing machines are indispensable. With the planer and thickness planer, you get a compact and lightweight combination device that is particularly suitable for small woodworkshops and DIY enthusiasts - whether you are making furniture, musical instruments, beams or floorboards. The electric planer and thickness planer has a wide work table of 920 x 263 mm, so that you can also comfortably process long beams. The unit planes up to 2.5 mm chips with its 2 sharp steel blades. You can set the desired chip removal manually. The powerful 1500-W motor rotates the blades at up to 9000 rpm so that you get a clean, fine surface. Use the planer blade cover to position the wood at the edge and plane it without injury. Then feed the wood through the thickness planer and level the parallel surfaces to fit. The thickness planer allows precise and accurate adjustment of the material thickness. Adjust the clearance height as required from 5 - 120 mm and run your board over the 270 x 303 mm worktable. The planing blades remove up to 2 mm of chips in one go. Thanks to a passage width of 252 mm, you can variably process different types of wood and plane them down to the desired thickness. Run your board over the 270 x 303 mm worktable. Our tip: slowly work your way forward. This gives you a finer result and is gentle on the machine. The wood runs through the powerful planer at 4 m/min. This allows you to process large quantities of wood quickly and efficiently. The surface planer has an extraction unit that you can position differently - depending on the situation, whether you use the thicknesser or the planer. Or if you use an additional extraction system to remove the fine dust produced during planing, with reliable suction. The planer and thicknesser is comparatively lightweight and can be used on the move. In addition, you can connect it via an ordinary 230 V socket. an.