Ortofon 2M Bronze Premounted hifi cartridges

2125.61 RON*

Descriere

The Ortofon 2M Bronze Premounted or SH-4 Black pickup system features a diamond with Fine Line needle cut. HiFi pickup for high demands Output voltage at 1000 Hz, 5 cm/sec: 5 mV Channel balance at 1 kHz: 1 dB Channel separation at 1 kHz: 26 dB Channel separation at 15 kHz: 15 dB Frequency response: 20 - 20000 Hz + 2 / - 0 dB compliance, dynamic, lateral: 22 µm/mN Pickup type: Nude Fine Line Radius of needle tip: r/R 8/40 µm Pickup force range: 1.4-1.7 g (14-17 mN) Tracking force, recommended: 1.5 g (18 mN) Scanning angle: 20 Internal impedance, DC resistance: 1.2 kOhm Internal inductance: 630 mH Recommended load resistance: 47 kOhm Recommended load capacitance: 150-300 pF Weight: 7.2 g Pickup Color: Black/Bronze Attention: HiFi cartridges and HiFi needles are not suitable for scratching or back cueing! Important note: Pickup systems are excluded from exchange! Important note: Pickup systems are excluded from exchange! Ortofon - 2M Bronze Premounted or SH-4 Black at a glance: In this version, the Ortofon 2M Bronze cartridge has been premounted on an Ortofon SH-4 Black headshell and features a Fine Line needle-cut diamond that is particularly suited to a demanding application. The profile of Fine Line diamonds provides less distortion, reduces vinyl wear, and presents information at the highest frequency, which is imperative for demanding listeners. With an output voltage of 5 mV, it provides optimal sound reproduction and sound accuracy. The bodies of the 2M series are made of Hopelex, which brings high rigidity and prevents unwanted resonance during the output. pickup of the 2M series also features Ortofon's Split Pole Pin technology. This allows the moving magnet systems to achieve a frequency response that is as flat as that of moving coil pickups.