Millennia NSEQ-HF

632.25 GBP*

Description

Treble band from Millennia's mastering EQ NSEQ. Air EQ for noble shine on voice & instruments; corner frequencies 4.8 - 21kHz. Air EQ in mastering quality: Treble and presence processing for instruments and voice Gives the signal a noble high-end character Discrete Class A signal path without transformers 21-step detented gain pot Gain range switchable from -18/+18dB to -9/+9dB Filter switchable between shelf and bell Selectable balanced or unbalanced input Handmade in California Outstanding low noise figure (-106dBu) Rugged housing Minimalistic design Technical data: Maximum output level: + 21 dBu Maximum input level (EQ Flat): + 20 dBu balanced, +14 dBu unbalanced Maximum input level (EQ Full Boost): + 17 dBu Frequency response: +0 / -3 dB below 2 Hz to above 300 kHz Maximum cut/gain (21 steps gridded): +/-18 dB (+/-9 dB with range switch on) Frequency centres - (peak/shelf selectable): 4.8 k, 5.8 k, 8.0 k, 10 k, 16 k, 21 k THD + Noise: 20 Hz - 30 kHz, all EQ bands switched on < .009%, typical < .003 % Common Mode Rejection Ratio: 10 Hz - 20 kHz, 100 mV C.M. > 60 dB, type > 80 dB Slew rate, +21 dBu Out: > 50 volts per microsecond Hardwired bypass switch? Yes Input impedance: 25 kiloohms Minimum output load impedance: 50 ohms Recommended load: > 500 ohms Output impedance: 5 ohms EQ amplifier: Pure discrete class A J-FETs Power Consumption: +210mA with all LEDs on HF equalizer from the NSEQ-4 in 500 format. The Millennia NSEQ-HF is a single-channel analogue equalizer in API 500 format and is based on the low-noise circuitry of the NSEQ-4. The fully discrete EQ focuses on the high frequencies. It offers a choice between shelving and peak filters and a selectable operating range of six different frequencies. The gain is adjusted via the associated potentiometer with 21 detented steps. In addition, there are switches on the front panel of the NSEQ-HF to adjust the gain range and an input switch to compensate for the 6dB level difference when using an unbalanced input signal. A true hardwire bypass ensures that the signal is not affected in any way when the unit is set to Off mode. The equalizer's housing is made of sturdy metal and the front panel is made of high-quality brushed stainless steel.